China Polini Maxi Hi Speed Variator 241.712 for the Honda SH 125-150 Made In Italy Supplied With 1 Roller Set 20X17 Gr.10 with high quality

Variety: Bike Equipment
Warranty: 12 months
Solution name: Variator complete with rollers
Supply TIME: 7-15 Times
Maker: Malossi
Application: SH 125i Abs E3 dal 2013 al 2016
Software 1: SH 150i Ab muscles E3 dal 2013 al 2016
Software 2: SH 125i Stomach muscles E4 dal 2017
Market place: Europe, Asia
Port: Ancona

POLINI 241.712 POLINI CZPT Hi Speed FOR HONDA SH one hundred twenty five-150I 4 STROKE 2013Exalting acceleration and by no means-ending motor progression with the new Polini CZPT Hello Speed Variator examined for the Honda SH125-150i 4 stroke bikes. The attribute is the already examined new lubricating technique utilized to all the new productions. Butmany are the complex features that mark out this new CZPT Hi Speed: The rollers sliding surfaces have sustained a new polishingtreatment to enhance the sliding. Piston pin manufactured of chromed nickel with the lowest friction coefficient: it attributes the DLCcarbon remedy for racing and aircraft programs devoted to the sliding and higher dress in parts. It has a huge internalpocket that includes the grease, inside of which there is a special spring that enables a constant grease distribution on the pineven throughout the most difficult problems of use. Thanks to this new engineering the functionality is consistent and, in contrast to the previousmodels, it is not necessary any longer to modify the rollers’ calibration to locate the ideal engine efficiency. It is available withcompression spring which is 10% harder than the unique 1 growing the motor revolution price when commencing. The rollers havea coating manufactured of a new combination of nylon and aramidic fibers. This brings together to give the best performance and less servicing coststhanks to these specific attributes that have also improved the bush and pin lubrication, whilst the rollers material enables for abetter put on resistance.We Disclaim all liability for improper use Primary Designs HONDA: SH 125i Abs E3 dal 2013 al 2016 – SH 150i Stomach muscles E3 dal 2013 al 2016 – FORZA 125 dal 2015 al 2571 – SH 125i Abdominal muscles E4 dal 2017 ->- SH 150i Ab muscles E4 dal 2017 -> – PCX one hundred twenty five ie Euro 4 dal 2018 al 2571 – PCX 150 Euro 4 dal 2018 al 2571BENELLI: CAFFE’NERO a hundred and fifty 4T LC E3 – CAFFE’NERO a hundred twenty five 4T LC E3 Specification

TypeMotorcycle Equipment
Place of OriginItaly
Brand TitleMalossi
Warranty12 months
Product identifyVariator complete with rollers
ApplicationHONDA PCX 125 ie 4T LC euro 3 <-2011 (JF28E)
Application oneHONDA PCX 150 ie 4T LC euro 3 2012->2014 (KF12E)
Application 2HONDA SH method one hundred twenty five ie 4T LC euro 3 (JF51E)
MarketEurope, Asia
Business Profile Piangiarelli and Quintaba’ Manufacturer On the web variable pace generate variator 1hp 2hp 3hp 5hp 7hp 380v motor drive frequency converter vfd 75kw S.R.L. was born in 1991 and is based mostly in Macerata, Italy. The firm is lively in the resale of spare components for automobiles, motorcycles and bicycles, and also operates in the trade of workshop and passion gear and in fitness equipment.We are specialized in the retail and wholesale of motorcycle and moped spare elements such as all consumable, mechanical and electrical components as nicely as modifications for the processing of leading organizations in the sector. We also offer a wide range of bike accessories.Above time, we have attained the trust of hundreds of clients so have confidence in us, you will not regret it! FAQ 1. who are we?We are based mostly in Macerata, Italy, start from 1990,promote to Jap Asia(fifty.00%),Domestic Industry(twenty.00%),Western Europe(15.00%),Japanese Europe(ten.00%),Southern Europe(5.00%). There are overall about 11-50 men and women in our place of work.2. how can we ensure high quality?Constantly a pre-production sample before mass productionAlways last Inspection just before cargo ac drives manufacturers variable pace generate variator frequency inverter 11kW 15HP VFD 630kW 3.what can you acquire from us?WINDSCREENS,TRANSMISSION BELTS,Bike Baggage,SCOOTERS VARIATORS,Motorcycle CLUTCHES4. why should you purchase from us not from other suppliers?Piangiarelli and Quintaba’ S.R.L. has specialised in the retail and wholesale of motorcycle and moped spare parts including all consumable, mechanical and electrical areas as effectively as modifications for the processing of major businesses in the sector.5. what companies can we supply?Recognized Shipping Conditions: FOB,EXW,Specific Delivery;Accepted Payment Currency:USD,EUR,JPY,GBPAccepted Payment Sort: T/T,PayPalLanguage Spoken:English,Italian

What is a worm gear reducer?

The worm gear reducer is used to change the output speed of the mechanical device. It consists of worm and helical gears mounted on the input side of the equipment. In some cases, this gear reduction system can be multi-stage, enabling extremely low output speeds. It has the advantages of low energy consumption and low vibration.
worm_reducerHollow shaft worm gear reducer

Worm gear reducer is an effective device to reduce the speed of mechanical equipment. The use of hard steel or non-ferrous metals for the worm increases its efficiency. Worms made of hard steel generate more heat than worms made of mild steel. Different thermal expansion results in gaps between mating surfaces. Despite its many benefits, worm gear reducers are prone to oil leakage, which can be a problem for a number of reasons.
Hollow shaft worm gear reducers are available in different gear ratios and are compatible with many motor types. Some are available in dual-axis and single-axis configurations and can be mounted horizontally or vertically. They are also available in intermediate ratios, as well as four- and five-speed transmission types. They can also be connected with additional output shafts.
Another type of worm gear reducer is the multi-stage variety. This gear reducer has multiple stages, enabling it to reduce speed with extremely low output speeds. In addition to the large transmission ratio, the multi-stage gear reducer has low noise, low vibration and low energy consumption.
Worm gear reducers offer space-saving solutions as well as increased torque. Agknx Gearbox offers worm gear reducers that solve common deceleration problems. The company has also expanded its product range into the bathroom market. Compared with the standard gearbox, the worm gear reducer has the characteristics of lower price and better torque output.
hourglass worm gear

The hourglass type worm gear reducer has multi-tooth line contact and is widely used in heavy machinery. These gears are characterized by a high load-carrying capacity, but they are highly sensitive to misalignment and manufacturing errors. However, by employing point contact, these gears can be made more reliable and can withstand higher loads.
Another major advantage of the hourglass worm gear is its high load capacity. The tooth profile design of the gears has a high relative slip ratio, which improves efficiency and load capacity. In addition, the large angle between the sliding direction and the contact line provides a low coefficient of friction. The hourglass worm gear also features premium carburized steel and phosphor bronze castings for exceptional durability. In addition, the tooth profile is very precise, the operation is quiet, and the speed fluctuation is small.
Agknx worm gear reducers are designed to operate for up to ten hours per day with an even load. The design of this worm gear reducer stems from Sumitomo Heavy Industries’ extensive experience in gear reducers. The smooth surface texture and precise tooth profile of the gears ensure that the gears can withstand high loads without damaging the lubricant film. In addition, Agknx worm shafts are specially designed to have the right stiffness.
Hourglass worm gear reducers are designed to maximize load capacity while minimizing energy consumption. Its fully meshed teeth reduce surface pressure on the worm gear teeth and increase load capacity.
worm_reducerDouble throat worm gear

There are a few things to consider when choosing a dual-throat worm gear. First, the diameter of the root circle must match the circle pitch of the larger gear. This measurement is usually done by measuring the distance between adjacent teeth. Alternatively, the worm’s normal module can be used. It is the value entered in the worm module dialog. In addition, the axial pitch of the worm should be equal to the pitch diameter of the circular pitch.
Double-throat worm gears are an excellent choice for heavy and heavy-duty applications. The design of this worm gear is ideal for heavy-duty applications as it provides a tighter connection between the worm and the gear. It is also more compact than other types of gear and is comparable to a fine-pitch lead screw.
The efficiency of a double-throat worm gear depends on the material of the gear and worm. Typically, gears are made of case-hardened steel, while worm gears are made of bronze or cast iron. In some cases, a combination of cast iron and bronze can be used.
The deflection of the worm shaft is also affected by the tooth parameters. Tooth height, pressure angle, and size factors all affect the deflection of the worm shaft. In addition, the number of worm threads is another important parameter that affects the deflection of the worm shaft.
Double-throat worm gears are commonly used in industrial applications where high drive reduction is required. The worm has a concave and internal tooth structure that can be adjusted to achieve various ratios. Worm gears and worm gear assemblies must be properly mounted on their shafts to prevent back drive.
Brass worm gear

The basic working principle of the brass worm gear reducer is the same as that of the traditional worm gear reducer. Its axial pitch must be equal to the circumferential pitch of the larger gear. The single-thread design advances one tooth per revolution, while the double-thread design advances two teeth. The threads on the worm are either left-handed or right-handed. The lead of a worm is the distance a point on the thread of the worm moves in one revolution. The lead angle is the angle tangent to the pitch of the cylinder and the axis of the worm.
Double-thread worm gear reducers are best for heavy loads. It provides the tightest connection between the worm and the gear. Assembly of the worm gear requires precise mounting. The keyway installation method involves drilling a square cut in the gear hole. This prevents the worm from rotating on the shaft and helps transmit torque. Then use the set screw to secure the gear to the hub.
The large fuel tank helps keep the worm gear clean and reduces heat. It also provides lubrication for extended life. Worm gear reducers with oil reservoirs provide a lubricated environment and low-friction surfaces. Additionally, it offers multi-position installation flexibility. Additionally, its housing is cross-milled for precise alignment. It also features internal baffles for leak-free ventilation.
I260 series worm gear reducers are one-piece iron casings with solid or hollow output shafts and tapered roller bearings. This gear reducer is designed for low to medium-horsepower applications. This gear reducer is a cost-effective option with low initial cost, the high gear ratio, and high torque in a compact package. Also, it is more shock resistant than other gear reducers.
worm_reducerBrass worm gear

Brass worm gear reducer is a reduction gear. This type of gear can provide a lot of reduction in a small package. This type of gear reducer also has the ability to generate high torque. However, it is important to understand that this gear reducer has thermal limitations, which reduce its efficiency. The choice of lubricant for this gear reducer is very flexible. However, being a yellow metal, it is important to remember that the lubricant must be non-reactive.
Worm gears are used in many consumer and industrial applications and have high reduction ratios. These gears are produced in various configurations and sizes. Worm gears are similar to spur gears but have non-parallel shafts. Worm gears are also suitable for applications requiring low output speed but high torque.
Worm gears have some distinct advantages over other gears. First, unlike standard gears, the worm rotates in a worm-like motion. This mechanism prevents reverse movement. This is because the lead angle of the worm gear is small. Additionally, the worms self-lock, helping to prevent reversal. However, this mechanism is not entirely reliable. Worm gears can be found in elevators, fishing reels, sprockets, and automotive power steering.
Another advantage of worm gears is that they are easy to manufacture. The rationale behind this design is to have two mutually perpendicular axes. Then, two or more threads are added to the worm gear. The common tangent between these two shafts intersects the pitch line of the worm gear shaft. This is the basis of transfer speed.

China Polini Maxi Hi Speed Variator 241.712 for the Honda SH 125-150 Made In Italy Supplied With 1 Roller Set 20X17 Gr.10     with high quality China Polini Maxi Hi Speed Variator 241.712 for the Honda SH 125-150 Made In Italy Supplied With 1 Roller Set 20X17 Gr.10     with high quality
editor by czh 2023-02-15