China Custom Food Grade High Viscosity Sanitary Stainless Steel Single Double Screw Mono Pump worm drive reducer

Product Description

 

 

Product Name :  Food Grade High Viscosity Sanitary Stainless Steel Single Double Screw Mono Pump

Sanitary screw pump is a single-screw transport pump. Its main working parts are the screw of the eccentric screw (called the rotor) and the screw bushing (called the stator) with the inner surface of the double helical surface. Its working principle is that when the motor drives the pump shaft to rotate, the screw rotates around its own axis on the 1 hand, and on the other hand it rolls along the inner surface of the bushing, thus forming the sealed chamber of the pump. Each time the screw rotates once, the liquid in the sealing cavity advances by a pitch, and with the continuous rotation of the screw, the liquid is pressed from 1 sealing cavity to the other sealing cavity in a spiral manner, and finally squeezes out of the pump body. Sanitary Single Screw Pump is used for in all fields widely to feed kinds of medium, running at a constant pressure continuously, without pulse and damage when feeding medium , and change the gauging aim through adjusting rotation speed.

 

Feeding Medium

This products is applicable for feeding medium which has the following properties

High CZPT content (diameter of the biggest particle is 50mm) or no soild content

Medium with all viscosities (1mPas ~ 300000mPas)

Medium that  is easy to be generated and swelled

Shearing sensitive medium

Medium with erosion

Medium with/without self lubrication 

Erosive medium (PH=1~14)

Adhesive medium 

Toxicity hazard medium

 

Structure Diagram of Sanitary Single Screw Pump

 

 

No.1 No.2 No.3 No.4 No.5 No.6 No.7 No.8 No.9 No.10
Outlet Tie Rod Stator Screw Shaft Universal Joint Inlet Connecting Shaft Filling Seat Filling Cover Bearing Seat

 

No.11 No.12 No.13 No.14 No.15 No.16
Bearing Transmission Shaft Bearing Cap Coupling Base Motor

 

Main Parameter of Sanitary Single Screw Pumps

 

Model Flow Rate(t/h)

Electric Power

(kw)

RotationSpeed

(r/min)

Inlet/outlet

(mm)

Connection Ends

DischargePressure

(Mpa)

CP10-1 0.5 0.37  1400  20  Clamp/union/flange  0.4
CP15-1 1 0.55  960  25  Clamp/union/flange  0.4
CP20-1 1.5 0.75  960  32  Clamp/union/flange  0.4
CP25-1 2 1.1  960  32  Clamp/union/flange  0.6
CP30-1 3 1.5  960  40  Clamp/union/flange  0.6
CP35-1 5 2.2  960  50  Clamp/union/flange  0.6
CP40-1 7 3  960  50  Clamp/union/flange  0.6
5.5 2.2  720  50  Clamp/union/flange  0.6
CP45-1 9 4  960  50  Clamp/union/flange  0.6
7 3  720  50  Clamp/union/flange  0.6
CP50-1 13 5.5  960  65  Clamp/union/flange  0.6
10 4  720  65  Clamp/union/flange  0.6
CP55-1 18 7.5  960  76  Clamp/union/flange  0.6
13 5.5  720  76  Clamp/union/flange  0.6
CP60-1 22 11  960  89  Clamp/union/flange  0.6
17 7.5  720  89  Clamp/union/flange  0.6
CP65-1 30 11  720  80  Clamp/union/flange  0.6
CP85-1 60 15  720  100  Clamp/union/flange  0.6

Application

Food industry: ketchup, mashed potatoes, peanut butter, yogurt, fresh cream, ice cream, cheese cubes, whey, beer, wort, yeast, fruit juice drinks, vegetable paste, jam, jelly, etc.

Petroleum industry: conveying crude oil, mixture of crude oil and water, mixture of coal field gas and water, etc.

 

Related Pictures

Advantages

 

1

Wide range of pressure and flow.

The pressure is about 3.4-340 kgf/cm2, and the flow rate can reach 18600cm3/min

2 The type and viscosity range of the conveyed liquid are wide
3 Because the inertial force of the rotating parts in the pump is low, it can use a high speed
4 Good suction performance and self-priming ability
5 Uniform and continuous flow, low vibration and low noise
6 Compared with other rotary pumps, it is less sensitive to incoming gas and dirt
7 Solid structure and installation Maintenance is easy

Company Profile

 

Our products are widely applied to dairy, food, beer, beverage, chemical industrial of equipment, and cosmetic industries. All technical aspects have reached the international leading levels and are in conformance with GMP requirements.

 

  • Workshop __________________________________________________________________________

  •  Sample Room_______________________________________________________________________
  • FAQ
  • Q1. Are you a trading company or factory?
    We are a manufacturing factory.

    Q2. What’s the payment terms?
    For small testing orders,we accept Paypal,Western Union,T/T and credit Card.
    For mass orders,we accept T/T and L/C.

    Q3.How do you control the quality?
    Quality control is very important to avoid material mixing and poor quality.We control the quality from beginning to the end.We
    only have 304 and 316L 2 different materials.100% inspection on raw material.During production,different materials in different place.After materials are finished,we choose 10% for inspection.If there is 0.1% problem in 10%,then no excuse to go ahead for inspecting 100% of the materials.

    Q4.How long is your delivery time?
    For normal production in 7-10days.For bulk order in 15-25days.

Back to Home

 

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: on-Line Service or Video Technical Support
Warranty: 1 Year
Screw Number: Single Screw Pump
Screw Suction Method: Single Suction
Pump Shaft Position: Vertical
Performance: Corrosion
Samples:
US$ 480/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

worm_reducer

Worm gear reducer

A worm gear reducer is a mechanical device used to reduce the viscosity of fluids. It can be used in a variety of applications and is available in a variety of sizes. Read on to learn more about these devices. They come in different shapes, sizes and prices. Also, these products are very reliable.

Viscosity

A new study shows that polymers derived from worms reduce the viscosity of aqueous solutions. The researchers mixed the worms with water and then applied shearing force to the mixture. Polymer-filled solutions are more resistant to shear forces than simple liquids. This is because when the solution is sheared, the filaments become entangled with each other. When the solution is sheared, the filaments line up, reducing the viscosity of the solution.
The researchers then used live insects to study the polymer’s shear thinning properties. By measuring “worm activity”, the researchers could calculate the viscosity of the mixture. The researchers then altered the worms’ activity and measured changes in the viscosity of the mixture.
The PSMA13 precursor was synthesized from BzMA at 90 °C. The resulting PSMA13-PBzMA65 worms were studied using SAXS, 1H NMR and TEM. They were found to be highly anisotropic over a wide temperature range.
The efficiency of a worm gear reducer increases with the number of revolutions of the input shaft. Braking torque also increases with the viscosity of the oil. These three factors are used to determine the efficiency of a worm gear reducer. A worm gear reducer with a helical pinion on the motor shaft will achieve a 40:1 gear ratio. The combination of a 4 liter ratio helical primary gear with a 10:l worm secondary gear will achieve high efficiency and overload capability.
The PSMA13-PBzMA65 dispersion has the same effective viscosity at 20 degrees Celsius and variable temperature. The transition time is 0.01 Pa s, indicating good thermal reversibility.

Self-locking function

Worm reducers have many advantages. This gear has a high capacity and can transmit a lot of power. It’s also very quiet. Its advantages also include a space-saving design. Another benefit of worm reducers is their ease of lubrication and cooling. It is also an excellent choice for transmitting high power with high gear ratios.
The self-locking function of the worm gear unit ensures that torque is only transmitted in one direction. When the load peaks, the torque signal is disabled. Unlike conventional gear reducers, self-locking worm gears are not interchangeable.
Self-locking worm gears are not suitable for high mass applications because the weight of the driven mass can overwhelm the gear. The large mass can cause a huge side load on the worm, which can cause the worm to break. To solve this problem, a self-locking worm gear train with special provisions can be designed to reduce the heat generated.
The self-locking properties of worm reducers are helpful in many industrial applications. It prevents reversing, which saves money on the braking system. It can also be used to lift and hold loads. The self-locking function is very useful in preventing backing.
The self-locking function depends on the pitch diameter and lead angle. A larger pitch diameter will make the self-locking function easier. However, the lead angle decreases as the pitch diameter increases. The higher pitch diameter will also make the worm reducer more resistant to backlash.
Self-locking worm gears are also useful in lifting and hoisting applications. If the worm gear is self-locking, it cannot reverse its direction without positive torque.s This makes the worm gear ideal for applications where the worm must be lowered.
worm_reducer

application

The worm gear reducer market is a global industry consisting of several sub-sectors. This report analyzes past and current market trends and discusses key challenges and opportunities in this market. It also highlights leading marketing players and their marketing strategies. Furthermore, the report covers important segments and provides information on emerging segments.
Worm reducers can be used in a variety of applications, such as reducing the speed and torque of rotating parts. These gears are usually available as gear sets and seat units and are available in multi-speed designs. Some manufacturers also offer precision worms and zero-backlash worms for high precision reduction.
Typically, worm gears are used on vertical axes that do not intersect. Compared to other gear drives, they are inefficient but produce a lot of reduction. There are two basic types of worm gears: double envelope and single envelope. The difference is in how they work. When the two axes do not intersect, a double-enveloping worm gear is used.
In the industrial world, worm gear reducers are the most popular type of reducer. They are known for their high torque output multipliers and high reduction ratios. They are used in many power transmission applications including elevators, safety gates, and conveyor belts. They are especially suitable for low to medium-horsepower applications.
Worm gears can also be used for noise control. Its unique shape and size make it suitable for tight spaces. They are also suitable for conveying heavy materials and the packaging industry. In addition, they have high gear ratios, which make them suitable for small and compact machinery.

cost

The cost of a worm gear reducer depends on several factors, including the type of worm used, the materials used to manufacture the equipment, and the number of users. The worm gear reducer market is divided into two types: vertical and horizontal. Furthermore, the market is segmented by application, including the automotive industry, shipping industry, and machinery and equipment.
Worm gear reducer is a popular type of reducer. They are available in standard and flush-type packaging. They feature C-side inputs for standard NEMA motors and multiple mounting positions to suit the application. For example, a soup factory can use the same hollow reducer in multiple installation locations.
Another application for worm gear reducers is in conveyors. They provide torque and speed reduction to move products efficiently. They are also widely used in security doors that automatically lock when they are closed. Typically, these doors use two separate worm drives. In this way, they cannot be reversed.
The cost of a worm gear reducer is determined by several factors. Size and material are important. Worm gear reducers can be made of aluminum, cast iron, or stainless steel. Its efficiency depends on its size and proportions. It is usually used as a retarder in low-speed machinery, but can also be used as a secondary braking device.
There are two types of worms: standard worm and double worm gear. Standard worms have one or two threads, and double worm gears have one left-hand and right-hand thread. A single-threaded combination will give you a 50 reduction ratio, while a dual-threaded combination will only give you a 25% reduction.
worm_reducer

manufacturing

Agknx Transmission Ltd. manufactures premium worm gear reducers with robust construction and premium case-hardened steel worms. They use phosphor bronze centrifugally cast rims and attach them to the output shaft in the center. They also feature dual-purpose bearings and a large overhang load margin on the output shaft. The high-quality reducer also has a full range of positive lubrication functions. This means that they do not need special attention when using low-speed shaft extensions.
China Custom Food Grade High Viscosity Sanitary Stainless Steel Single Double Screw Mono Pump   worm drive reducerChina Custom Food Grade High Viscosity Sanitary Stainless Steel Single Double Screw Mono Pump   worm drive reducer
editor by Dream 2024-05-15